Inox Electric Sliding Door

The stainless steel electric sliding chiller & freezer cold storage doors are manufactured at our facilities, utilizing the German know-how that we have acquired collaborating with the biggest German raw materials manufacturers of the sector.

inox electric sliding door 1

Thermal insulation

Up to 0 °C for chiller and up to -40 °C for freezer


Can be constructed in all dimensions

Stainless Steel

Using German raw materials


Certified with ISO 9001: 2015 & CE 89/106 EN13241-1

Electric Sliding Door project image 8 1

Electric Sliding Door

Our experience in combination with the excellent quality german raw materials & state-of-art latest technology equipment & handmancraft allow us to manufacture doors of high endurance & thermal insulated according to the European HACCP regulations and with the necessary CE certifications.


Automatic activation of sliding door via a mechanism with a motor connected to a multifunction panel. Switchgear IP 56 is suitable for installation in a moist environment and includes an electronic circuit for controlling the functions and an inverter to control the paths during operation of the opening-closing and the necessary needs in electrical power in respect to the security settings.


All automation system is pre-cabled therefore the connection of the board becomes easy through a multipolar connector which is located at the bottom of the board. There are already pre-installed factory settings which are easily changed depending on the needs of each user.


Speed is set to 0,27 m/sec (as per regulations) and the engine has a reversible reducer. The speed can change easily from the board.


The primary safety device for crash protection is a sensitive bar resistant type, located on the vertical edge of the door panel, which in case of impact with an obstacle, automatically stops the door and reverses motion.


The controls of the STOP (end of movement) during the opening and closing is activated by a micro switch. The transmission is through a chain with adjustable power and not with tapes for cost reasons with breakage problems.


A yellow light is flashing signals that the door is in motion. Besides the many arrangements for opening – closing the door from the board, two cords connected to switches are placed in front and behind the door (at desired distances) to facilitate the operator of the forklift at the entrance and exit of the cold room.

Manually operated

In case of power failure the door is operated manually.



You can customize your Cold Storage Door according to your needs by choosing AMP. In this chart you can see all the available options that our factory gives you. You can also add more features to your product by contacting A. Motors office.



door option1 bumper 3 1

Decorative Protective Pumpers

door option2 entrance ramp 3 1

Anti-slip entrance ramp

window 8

Large dimensions window

door option4 inox circular 6 1

Stainless Steel Sheet with circular design

electric opt1 lock

Security lock

electric opt2 plc INOX 1591x2048 1

Inox Control Panel


Motion Detector



Sliding Door Components

Sealing Gaskets and Heaters




Remote control

One or more remote controls, push-button for opening-closing and security mushroom on the control panel. Opportunity for partial opening.


Special disconnect mechanism

Special mechanism which in case of power failure, disconnects the chain from the motor and the door opens easily as a manual door.


Movement with belt

Possibility of movement of the door with belt instead of chain for silent operation of the opening-closing.

Limitatori ZBC Compomac

Torque limiter

Torque limiter as an extra safety device of the electric sliding door

Some of our Clients

logo mymarket 1
logo ab 1
logo lidl 1
logo sklavenitis 1
logo motor oil 1
logo aktor 1
logo stergiou 1
logo papadopoulou 1
logo elbisco 1
logo vianex 1
logo demo 1
logo costa navarino 1
logo grecotel 1

Installation Video